极品人生

 找回密码
 注册
搜索
极品人生 器材交易 (仅提供交易平台,不承担任何责任) 音源 › 查看主题

2829

查看

31

回复
123下一页
返回列表

go

KAB RF1黑胶超低频过滤器

1#
发表于 2016-9-2 12:39:49 | 只看该作者 | 倒序看帖 | 打印 | 使用道具
本帖最后由 friderich 于 2017-6-27 20:05 编辑

KAB RF1黑胶超低频过滤器,仅切除有害的超低频信号,有效提升音质,能够有效解决黑胶系统低频单元颤动问题,箱说全,成色超新,1000不接刀,有意的烧友请联系18015300187
引用一段国外介绍
Kab RF-1 Rumble Filter

Getting into LP's and startled at the big speaker cone movements that you're seeing? Thinking a better turntable will help? It may not! This very low frequency energy is called rumble. Much of it is actually cut into the record groove when the master disc was made. Other sources are mis matched tonearms, poorly damped tonearms and acoustic feedback. Often, the only way to suppress rumble is with a really good rumble filter.
With rumble eliminated, the soundstage becomes more "still" and the bass actually tightens up because the woofers are no longer modulating and the power amp is no longer wasting current resources on sub audible noise.



The KAB Great Sound Escort RF-1 is a very fine transparent rumble filter that not only suppresses very low frequency (subsonic) energy, but also uses a unique active cancellation circuit that effectively suppresses vertical rumble too. Your subwoofers will thank you! Suppresses acoustic feedback too.

Two important things to know:

1. When records are made, frequencies below about 150Hz are combined to mono. This is done to avoid large out of phase groove excursions.

2. When the stereo stylus moves vertically, the two signals produced are equal and 180 degrees out of phase.
Therefore, below 140Hz, the music is in phase in the lateral stylus motion, and only out of phase noise is found in the vertical stylus motion.
The KAB RF-1 takes advantage of this by electronically combining the left and right channels together below 140Hz. In so doing the filter effectively cancels vertically modulated noise. Vertical rumble comes generally from bearing noise of the disc cutting system. But since the music below 140hz is already mono on the disc, the musical information is unaffected. Below 20Hz, all signals are quickly attenuated at 18dB/Octave.

The RF-1 is a must for vinyl enthusiasts.

The KAB RF-1 is easy to install. Place it in between the phono preamp and control amp or in a process loop. It requires no attendance. It is happy to remain powered up at all times.


本帖子中包含更多资源

您需要登录才可以下载或查看附件。没有帐号?注册

x

使用道具 TOP

2#
发表于 2016-9-3 17:33:08 | 只看该作者

使用道具 TOP

3#
发表于 2016-9-7 17:19:37 | 只看该作者

使用道具 TOP

4#
发表于 2016-10-8 15:10:14 | 只看该作者

使用道具 TOP

5#
发表于 2016-12-30 10:27:18 | 只看该作者

使用道具 TOP

6#
发表于 2017-3-9 12:38:41 | 只看该作者
继续

使用道具 TOP

7#
发表于 2017-5-5 10:31:35 | 只看该作者

使用道具 TOP

8#
发表于 2017-5-7 06:42:34 | 只看该作者
欢迎退出黑社会,回到明媚的阳光下!

使用道具 TOP

9#
发表于 2017-5-8 07:35:06 | 只看该作者
是的

使用道具 TOP

10#
发表于 2017-5-11 09:05:44 | 只看该作者

使用道具 TOP

11#
发表于 2017-5-15 10:02:23 | 只看该作者
继续

使用道具 TOP

12#
发表于 2017-5-27 16:14:07 | 只看该作者

使用道具 TOP

极品人生 ( 粤ICP备08007514号)

GMT+8, 2024-11-24 17:32, Processed in 0.026241 second(s), 15 queries.

Powered by Discuz! X3.2

© 2001-2010 Comsenz Inc.