马克、高文、WADIA都是响当当的角儿啊。与您不谋而合，洋木头其实不赖（像某高价家具那样在海上旅游一圈回来的不算），只是物流成本花得太冤，也不低碳啊。

KAISER KAWERO 的配置菜单
1.  单元  All cone drivers (also the passiv radiator) custom made
from Audiotechnology Denmark.  New Carbonpaper Sandwich Cone.（最早是PP盆，是不是又升级为三明治，或者可选项）
2. 高 音     RAAL 70-20 XR Tweeter with amourpheous core
3. 低音网络 Mundorf CFC10 copperfoil inductor for woofer crossover
4.中音网络 Mundorf silver-goil-oil capacitor on midrange capacitor group.
5. 中音 Duelund VSF Copper Caps on midrange capictor group.
6. 高音通道 Capacitors in tweeter signal path Duelund VSF Copper.
7. 非信号通道的原件选择根据制订不同有选择 Crossover components not in the signal path Duelund CAST Copper  
8.   Internal wiring with Duelund silver cable.

duelund电容还有升级空间啊

duelund电容还有升级空间啊，VSF与CAST系列还有银膜电容。

duelund太毒了，要把单元的潜力全部”榨“出来！！

一个老外在DIY中的经验分享 ，其理念和观点仅作分享，个人不做评价。
。箱子如图所示。

首先是高音和中音的距离对比。在高音和中音距离较大时。

距离缩小时，效果明显改善。在这种结构的设计上采用70的小高音系列。
in order to reduce the distance between the MTM, Shin suggested to change to RAAL 70-20XR instead of 140-15D. There will also be chamfering at the edge of the tweeter to reduce diffraction effect. Ideally, this chamfering should be more round and Shin has actually created a rendering for his Aurora. But I still prefer the more straight line approach

制作者对比了三种高音， RAAL 铝带，RAVEN 铝带，Mundorf AMT 的。
很难找到这三种单元的对比。
Alex originally designed to use Raven 2.0 as the tweeter which is a reasonable tweeter by all means. However, it lacks in dynamics and while it does not sound harsh, it doesn’t give the dynamics that I like. The original design also has the faceplate too close to the cabinet edge and causes significant diffraction problem. Raven also has a wrong tonal balance and Alex “tried” to fix the problem by loading it with a horn faceplate. However, compared to RAAL, Raven still sounds wimpy in the low end.

Alex moved on to use Mundorf AMT transducer which sounds better than Raven. But still, while it is dynamic, it is less refined and less balanced when compared to RAAL. Compared to RAAL, Mundorf sounds harsh. RAAL belongs to a different league, there is no comparison, I am sorry. So, for my new speaker, I will stick to RAAL. Scanspeak D30/6600 did come to our minds as this will allow even shorter distance between the MTM. But I am too impressed with the dynamics offered by RAAL and since I use active digital XO, I can easily burn the ribbon which requires a fairly easy ribbon replacement. I do not want to burn by dome tweeter though!

中音是灵魂，爆料一下。MINDRANGE 的折环。LR的导磁系统。
The choice of mid woofer is fairly easy. My current speaker is using Audiotechnology driver and I certainly like the density and dynamics from Per’s drivers. Alex decided before that a 18cm C-quenze was a better choice. But since I have a 8” woofer, I think 15cm C-quenze should have been a better option.

上个用长的



还有这个

中音是灵魂，爆料一下。MINDRANGE 的折环。LR的导磁系统。
The choice of mid woofer is fairly easy. My  ...
sigh 发表于 2011-12-26 00:06

工艺真实美极了，精就一个字。这个喇叭配上RAAL的70-20AM铝带，中高音基本也是南帝北丐的水平了。