|
本帖最后由 ikushi 于 2015-5-25 17:11 编辑
三人行必有我师
自从SME30/12Gold唱盘加入系统服役后,一直想找一颗与这个镀金盘匹配的唱头。于是,悄悄吹了一哨子,约四个朋友一起搞了一次小型的团购。尽管是小型的,但是代理还是让我们等待了一个多月之久!前不久唱头终于送到,就有了这篇文字。
SME30/12Glod唱盘与新到的MySonic Signature Gold。
SME30/12Glod唱盘与Ikeda Kai(魁)组合。
TW Raven AC3上的两个组合:右手边是号称为“公理”的AS Axiom唱臂与心爱的Kondo IO-M组合,后方是TW10.5寸唱臂与MI名头London Decca Reference。
这张拼图里所列出的4只唱头各自的数据分别如下(摘自网络):
Ikeda Kai Specifications
Type: MC cartridge
Output Voltage: 0.19 mVrms (1kHz 35.4mm/sec., at 45°peak)
Coil Impedance: 2.5 ohms (1kHz)
Appropriate Stylus Force: 1.8 grams ±0.2 grams
Frequency Response: 10Hz ~ 45kHz
Channel Separation: over 27dB (1kHz)
Channel Balance: within 1.0dB (1kHz)
Stylus Chip: Micro-ridge solid pure Diamond
Cantilever: made of Boron.
Top Panel: made of the strongest Titanium
Weight: 11.5 grams
Compliance: 7 x 10-6cm/dyne
Mysonic Signature Gold Specifications
Type: Ultra-low impedance MC cartridge
Frequency response: 10 ~ 50kHz
Output voltage: 0.5mV
Inner impedance: 1.4O (DCR)
Magnet: Neodymium #50
Stylus pressure: 1.9 ~ 2.2g
Channel balance: within 0.5dB (1kHz)
Crosstalk: more than 30dB
Terminal pins: shining Rhodium-plated
Weight: ca. 10g
Kondo IO-M Specifications
Silver Moving Coil (MC)
Output Voltage 0.12mV (1KHz, 5cm per second)
Source Impedance 1 Ohm
Tracking Force 2.0 ± 0.2 g
Compliance 6.0 × 10-6 cm/Dyne
Channel balance within 1dB at 1KHz
Channel separation greater than 25dB at 1KHz
Weight 11 grams
London Decca Reference Technical Data
Stylus: Exclusive line contact
Type: Moving-iron/positive scan phono cartridge
Output: 5mV
Tracking force: 1.5 not to exceed 2 grams
Input impedance: 100 to 300pF
Compliance laterally: 15 x 10-6cm/dyne
Compliance vertically: 10 x 10-6cm/dyne
(未完待续) |
本帖子中包含更多资源
您需要登录才可以下载或查看附件。没有帐号?注册
x
|